Description
KRYPTON II XPS-300 (Krypton) professional white manicure drill combines power, convenience, and innovative technology. The lightweight XPS-300 handle weighs 165 grams, reducing strain on the technician's hand. With 70 watts of power and a rotation speed of 30,000 rpm, it can easily handle any manicure or pedicure task.
The compact control unit is equipped with an LED display that shows the current speed and operating mode. The convenient location of the control buttons allows you to switch modes instantly, and the “EASY CONTROL” function allows you to change the direction of rotation of the cutter directly during operation.
The KRYPTON II XPS-300 manicure and pedicure drill with a lightweight handle features the “FREE FOOT” function – a pedal with a pause mode. For foot control, set the speed and press the pedal once to start. To stop the tool, press the pedal again. After the pause, the milling machine will continue to operate at the previously set speed parameters.
The Krypton II XPS-300 white professional manicure drill is equipped with the “PROTECTION+” function, which protects the device from overload, extending the service life of the micromotor. The SmartLock double locking mechanism minimizes vibration and makes the drill movements more precise, which is important when performing complex manicure techniques.
KRYPTON II XPS-300 (Krypton) professional white manicure drill — features:
power supply: 110-220 V, 50 Hz;
power: 70 W;
speed: 30,000 rpm;
torque: 3.0* N/cm;
XPS-300 handle weight — 165 g;
LED display with speed and operating mode indication;
“EASY CONTROL” function — switch rotation direction on the fly;
“FREE FOOT” function — pedal with pause mode;
PROTECTION+ function — motor overload protection;
SmartLock double lock;
tool weight: 1325 g;
dimensions: 12 x 14.7 x 8.8 cm.
How to use the KRYPTON II XPS-300 nail drill with a lightweight handle for manicures and pedicures:
Connect the power supply to the mains and insert the micromotor handle into the appropriate socket.
Install the drill bit, securing it in the handle using the SmartLock mechanism.
Turn on the KRYPTON milling machine and select the operating mode using the control buttons.
Adjust the rotation speed using the regulator or pedal.
During operation, change the direction of rotation using the “EASY CONTROL” button if necessary.
To temporarily stop the milling machine, use the pedal with the “FREE FOOT” pause function.
When finished, turn off the device, remove the cutter, and clean the equipment of dust.
Components:
power supply;
micromotor handle;
foot control pedal;
handle holder;
operating instructions;
warranty card;
warning letter.
Warranty service 24 months
