Description
KRYPTON II XPS-350 (Krypton) manicure drill 35,000 rpm has been improved and designed with attention to the smallest details to ensure comfort and efficiency for the technician. With 70 W of power and a speed of 35,000 rpm, it makes hardware manicures and pedicures easy and effective.
The KRYPTON II XPS-350 manicure and pedicure drill White is convenient, ergonomic, and compact. The device allows you to precisely adjust the speed from 0 to 35,000 rpm, selecting the optimal speed depending on the task.
The XPS-350 micromotor handle weighs 265 g and operates smoothly without vibration. The attachment change mechanism is easy to use. The collet chuck securely holds the drill bit and is located in the center of the body, which prevents accidental opening during operation.
The control unit is compact and takes up a minimum of space on the workbench. The LED display of the professional Krypton 2 XPS-350 manicure device shows the current speed and operating mode of the milling machine. All control buttons (forward/reverse, foot control, speed adjustment) are located on the front panel.
The increased number of holes for cutters on the body allows you to keep the necessary attachments close at hand. The holder for the milling cutter handle is located at an angle that prevents the cutter from hitting the table and damaging the workplace.
KRYPTON II has three functions that simplify the work of the master: easy control, protection plus, free foot.
KRYPTON II easy control allows you to electronically switch the direction of rotation of the cutter on the fly. By pressing the direction change button, the milling machine processor will switch automatically, saving time and reducing the risk of damage to the device.
KRYPTON II free foot modernizes the operation of the pedal - it performs a pause: set the working speed, press the pedal and work. To pause, press the pedal again. This feature saves a lot of time - you don't have to constantly press the pedal.
Protection plus protects the device from overload. If the cutter is installed incorrectly or the lock on the handle is not closed, the device will emit an audible signal, the display will show error E4, and an automatic lock will occur to prevent damage.
This feature is useful when using a bit that is not the right size for the set speed. If the device is overloaded, the manicure and pedicure device will detect this, display an error, and stop working. To continue, you will need to pause briefly to restart the cutter.
KRYPTON II XPS-350 (Krypton) manicure milling machine 35,000 rpm — features:
-power: 70 W;
-voltage: 110V, 50 Hz;
-torque: 3 N/cm;
-smart electronic FW/REW switching on the fly;
-smooth speed control: 0-35,000 rpm;
-overheating protection;
-micro motor handle made of plastic, equipped with a cooling system;
-pedal to stop or continue operation;
-LED display;
-holes in the body for cutters;
-overload protection prevents serious damage and extends the service life of the milling machine;
-quiet operation without noise and vibration;
-handle weight: 265 g;
-size: 12x14.7x8.8 cm;
-weight: 1365 g.
Professional manicure device Krypton 2 XPS-350 white.
power supply unit;
micromotor handle;
foot control pedal;
handle holder;
user manual;
warranty card;
warning sheet.
Bucos KRYPTON II XPS-350 milling machine for manicure and pedicure White — use:
1.Do not activate the milling machine and close the handle without the attachment, change the direction of reverse during operation of the device, overload with heavy attachments. Follow the recommendations of the milling machine manufacturer.
2.During use, check the temperature of the milling unit by touch (with your hand): if it is hot, stop working and wait for it to cool down completely.
3.Do not force cool the device (place it under air conditioning, put ice on it, use a hair dryer, etc.), as this may damage the circuit board.
4.Do not forget to keep the device clean – remove dust and other contaminants.
The lower the speed of the equipment, the more comfortable it is for the client and the longer the attachments and the device will last.
5.To avoid problems associated with power surges, it is recommended to connect the milling machine through a voltage stabilizer.
