DNKa' Builder Gel #0012 Diana, 30 ml

Characteristics and consistency
A versatile, low-cure-temperature, three-phase modelling gel of the highest quality with a thixotropic effect. DNKa’ Builder Gel has a medium-thick consistency, spreads easily and evenly, and is self-levelling. This hard gel allows you to create a durable coating, shape the required architecture of any length, holds the arch and tunnel perfectly, does not deform whilst being worn and is not affected by temperature changes. DNKa’ Builder Gel allows you to work using the express extension technique without surface filing. Suitable for extensions on both lower and upper forms, corrections, shaping the nail plate and strengthening natural nails of any length.

Key benefits:

• Consistency: medium-thick.

• Pigmentation: 80% to 99%.

• Safety: low-temperature gel with high adhesion.

• Ease of use: thixotropic effect, does not spread during application.

• Properties: hard, durable and versatile.

• Purpose: extension, strengthening.

Specifications

APPLICATION TECHNIQUE:
1. Carry out standard nail preparation: remove any previous polish, buff the surface, shape the nails as desired and perform a manicure.
2. Apply DNKa’ Ultrabond – an acid-free primer for extra adhesion.
3. Apply a layer of DNKa’ Rubber / Fiber Base using rubbing motions. Cure in a UV lamp for 1 minute, or in an LED/hybrid lamp for 30 seconds.
4. Trim and position the extension tip against the natural nail.
5. Apply the selected DNKa’ gel in a thin layer to mimic the free edge and cure it in a UV lamp for 90 seconds, or in an LED/hybrid lamp for 60 seconds.
6. File the extended free edge of the nail and degrease it using a degreaser.
7. Apply the selected gel as a levelling coat and cure it in the lamp for 10 seconds. Then clamp the extended nail and cure it in a UV lamp for 90 seconds, or in an LED/hybrid lamp for 60 seconds.
8. Apply the DNKa’ top coat and cure in a UV lamp for 90 seconds, or in an LED/hybrid lamp for 60 seconds.